Previous
Next

Excavation kit Pneumatic spade Scrap'Air 55V2 T-handle

Reference 07070550

S55 V2 pneumatic spade kit with T handle. Wether you are digging (excavating), demolishing, or clearing, the Scrap'Air pneumatic spade with T handle will save you time and energy during work and on your various worksites. 

€1,927.00
Product in restocking

S55 V2 pneumatic spade kit with T handle. Wether you are digging (excavating), demolishing, or clearing, the Scrap'Air pneumatic spade with T handle will save you time and energy during work and on your various worksites: 

  • Digging in hard and rocky soils
  • Foundation work
  • Concrete, rock and asphalt demolition
  • Loosening and decompacting compacted soil
  • Uprooting work
  • Clearing of foundations and house connections
  • Precision work, particularly in confined areas
  • Soil decompaction for excavators
  • Public works, drains and pipes
  • Gardening and landscaping
  • Metal ladle cleaning

Technical data 

Pressure 6-8 BAR / 87,02 - 116,03 PSI
Air consumption 300 L/MIN / 10,59 CFM
Blow frequency 2250 BLOWS/MIN
Power 35 JOULES / 25,81 ft-lbf
Length 82 CM / 32,28"
Weight 5.900 KG / 13 lbs


Kit includes:

Scrap'Air S55 delivered in a case with:

- 1 spade
- 1 chisel
- 1 in-line oiler 
- 1 fitting claw
- 1 oil-can 
- 1 protection kit 

Advantages: 

  • Work efficiently thanks to optimal force and vibration
  • 2 anti-vibration systems
  • Quick and easy tool change
  • Ergonomic and energy-saving work method
  • High-quality product with a long service life
  • Low air consumption for high-performance work (output 300L/min) 
  • Wide range of applications
  • Length of device customisable according to your work
  • Large choice of tools
  • Horizontal and vertical working

Save a significant amount of time on your excavation work, public works, civil engineering etc.

Proven French technology since 1967. 

An optimal working position is beneficial for the back and other muscles that are usually used when trying to remove pavements. 

For the compressor: 7 BAR at 300 L/min is sufficient to reach its impressive speed of 2,250/min. A 230-vold compressor is enough to operate the air spade efficiently, or a traditional construction compressor is also suitable. Quality and performance are guaranteed! 

Spécifications techniques

Scrap'air type Scrap'air S55
Tool shank diameter Diamètre 18 MM
Power 35 joules

Video

Click on a thumbnail to load the video

group_work Cookie consent